Tying Vises

Creekside Flyfishing carries a full selection of Renzetti vises, tying tools and attachments.  Renzetti is the ultimate in true rotary vises and their Traveler series is a best seller.  Made in the USA

Creekside Flyfishing is a full-line Renzetti dealer. 

To see more Renzetti products like tools, carry cases, etc., check out our on-line catalog.

MASTER VISE     

The master's vise is the most advanced and versatile vise available. It is for the all around or production tyer and is a must for the salt water tyer. It will handle any hook from 28 to 10/0 with only one jaw and will keep the hook shank on the rotary center line. The jaw is infinitely adjustable to allow the tyer to hold the hook at any part of the hook bend. The jaw lock is lever operated and requires less than one quarter the force needed for other lever operated vises to lock the hook tight enough to be bent. In fact, the lever is only one inch long and is precisely limited in its travel so the jaw cannot be unnecessarily overstressed. The master's vise also has the traditional rotary actuator which allows the tyer to rotate the jaws by spinning the rotary arm. The arm can be reversed for left hand tying and/or locked in position to rotate in both directions. The rotary tension unit allows the tyer to adjust the drag on the rotary shaft from free spinning to a locked position at any angle desired. The ball bearing head gives precision alignment and very smooth rotary motion to the shaft.

• Ball Bearing Head and Precision Heat Treated Steel Jaws
• True 360 Degree Rotation
• Adjustable Rotary Tension and Lock
• Salt Water C-Clamp or Salt Water Pedestal Base
• Lever Operated Jaws which hold hooks for 10/0 to 28
• One-Way Rotary Actuator
• Material Clip
• Adjustable Bobbin Holder
• Lifetime warranty against defects in workmanship and material (Does not cover normal wear and tear.)

PRESENTATION CAM 4000 VISE        

This vise is for the tyer who needs a vise that will handle hooks for tying trout, bass, salmon, and some salt water flies and will hold any of these hooks tight enough to be bent. It comes with cam jaws set at an angle to allow maximum finger clearance behind and around the hook. They have three mounting positions to accommodate different hook sizes so the hook shank can be placed on the center line of the rotary shaft. When using the rotary feature of the vise the hook shank will, therefore, turn on its own axis so you can smoothly wind hackle or other material with precision and ease.

• Adjustable Bobbin Cradle
• Adjustable Rotary Tension and Lock
• One-Way Rotary Actuator
• Material Clip
• Lifetime guarantee against defects in workmanship and material (Does not cover normal wear and tear.)
• Must be ordered for right or left handed tyer

PRESENTATION CAM 2000 VISE

The Presentation 2000 features Renzetti's patented adjustable jaw hinge, allowing tyers to achieve rotary action.  In addition it's completely anodized for a more durable finish.  The highly versatile Presentation 2000 is like no other vise and will quickly have you appreciating the beauty of true rotary. 

Price:  $284.95  (with standard C-Clamp or Standard Base with 7" stem)

Standard features as listed below:  

• Hinged rotary head and shaft
• Ratchet crank arm
• Adjustable Bobbin Cradle
• Two Rotary Tension Adjustments
• Case Hardened Steel Jaws handles hooks for 4/0 - 28
• Lifetime guarantee against defects in workmanship and material (Does not cover normal wear and tear.)

TRAVELER 2200 SERIES VISE - NEW FOR 2009

Redesigned for 2009, the Renzetti Traveler 2200 provides changes to help make you a better tyer.  Must be ordered for right or left handed tyer. 

Features:

• All anodized aluminum parts

• Bobbin Cradle

• Case hardened patented cam jaws

• Polyurethane o-ring

• Rotary tension screw

• Black powder coated base with a 7" aluminum stem OR a black opwder coated c-clamp with an 8" stem

• Saltwater Traveler series has a spinning attachment and a material clip

C2202 - Traveler 2200 C-Clamp model:  $189.95

C2203 - Traveler 2200 Pedestal Base model:  $189.95

SC2202 - Traveler 2200 C-Clamp model:  $229.95

SC2203 - Traveler 2200 Pedestal Base model:  $229.95

TRAVELER SERIES VISES 

The original Cam Series Traveler Vise features cam operated jaws.  It will handle all these hooks with exceptional gripping power. The traveler is ideal for taking on trips or to the stream - the perfect traveling vise since the C-Clamp model only weighs 8 ounces. The beginner as well as the experienced tyer will find this vise highly functional and of excellent quality.   

Standard features as listed below:  

• Adjustable Bobbin Cradle
• Two Rotary Tension Adjustments
• Case Hardened Steel Jaws handles hooks for 4/0 - 28
• Lifetime guarantee against defects in workmanship and material (Does not cover normal wear and tear.)
• Must be ordered for right or left handed tyer

RENZETTI TUBE FLY VISE   

Tube flies have a long and productive history in the fly fishing world. To accommodate their increasing popularity, we offer a complete Tube Fly vise as well as a tube fly vise accessory that will fit our Traveler Series. Tying tube flies has never been easier. The vise will handle tubes up to 4-inches long. It has a 1/16-inch diameter mandrel and a rotary tension screw. The Tube Fly vise is also available with a complete set of mandrels. Pedestal base comes with pockets.

Home - On-Line Catalog - Fishing Report - Classes & Clinics - Guided Trips - Classic Salmon Materials - Fishing Oregon - About Us